Saltar navegación principal
Normas DIN – AENOR
DIN EN ISO 13856-2:2011-11

DIN EN ISO 13856-2:2011-11

Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for the design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO/DIS 13856-2:2011); German version prEN ISO 13856-2:2011 / Note: Date of issue 2011-10-31

Sécurité des machines - Dispositifs de protection sensibles à la pression - Partie 2: Principes généraux de conception et d'essais des bords et barres sensibles à la pression (ISO/DIS 13856-2:2011); Version allemande prEN ISO 13856-2:2011 / Attention: Date de parution 2011-10-31

Sicherheit von Maschinen - Druckempfindliche Schutzeinrichtungen - Teil 2: Allgemeine Leitsätze für die Gestaltung und Prüfung von Schaltleisten und Schaltstangen (ISO/DIS 13856-2:2011); Deutsche Fassung prEN ISO 13856-2:2011 / Achtung: Erscheinungsdatum 2011-10-31

Fecha Anulación:
2013-08 /Withdrawn
Equivalencias internacionales:

ISO/DIS 13856-2 (2011-11)

prEN ISO 13856-2 (2011-11)

Relación con otras normas DIN:

Reemplazada por: DIN EN ISO 13856-2:2013-08

Resumen:
This document specifies general principles and requirements for the design and testing of pressure-sensitive edges and pressure-sensitive bars used as safeguards and not as actuating devices for normal operation. It is applicable to pressure-sensitive edges and pressure-sensitive bars, with or without an external reset facility, used to detect persons or body parts of them who can be exposed to a hazard such as moving parts. This document is primarily aimed at safety and reliability rather than suitability. This document is restricted to the functioning of pressure-sensitive edges and pressure-sensitive bars and does not specify the requirements for their application (e. g. dimensions with regard to a particular application). This document is not applicable to specify the dimensions of pressure-sensitive edges or pressure-sensitive bars in relation to a particular application. This document does not apply to stopping devices according to EN 60204-1 used only for normal operation, including emergency stopping, of machinery. Additional requirements can be necessary, where pressure-sensitive edges or pressure-sensitive bars are used in locations accessible to elderly or disabled people or children.
Keywords:
Accident prevention, Applications, Contact, Definitions, Design, Electrical engineering, Equipment safety, Ergonomics, Guiding principle, Inspection, Machines, Mechanical engineering, Occupational safety, Operability, Operating forces, Operation, Operational safety, Poles, Pressure, Pressure sensitive bars, Properties, Protection against danger, Protection devices, Protection of persons, Protective devices, Reliability testing, Safety, Safety engineering, Safety of machinery, Safety requirements, Safety tests, Signal processing, Signal transmitters, Signals, Specification (approval), Switch rods, Switchgears, Switching, Testing, Workplace safety
131,5
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta