Saltar navegación principal
Normas DIN – AENOR
DIN 15185-2:2011-10

DIN 15185-2:2011-10

Industrial trucks - Safety requirement - Part 2: Use in narrow aisles / Note: Date of issue 2011-11-14

Chariots de manutention - Exigences de sécurité - Partie 2: Utilisation dans les allées étroites / Attention: Date de parution 2011-11-14

Flurförderzeuge - Sicherheitsanforderungen - Teil 2: Einsatz in Schmalgängen / Achtung: Erscheinungsdatum 2011-11-14

Fecha Anulación:
2013-07 /Withdrawn
Resumen:
In Annex I, Section 1.8, paragraph 3 of the "Arbeitsstättenverordnung" requires that - if handling equipment is used on transport roads - for pedestrians, a sufficient safety gap must be maintained. To avoid the crushing of human bodies the safety gap is at least 500 mm (see DIN EN 349 " Safety of machinery - Minimum gaps to avoid crushing of parts of the human body ", Section 4.2). The safety gap must exist on both sides of the industrial truck. This standard shows options for requirements with which a sufficient personal protection can be achieved, if the safety gaps, when using a guided industrial truck in very narrow aisles, cannot be maintained.
Keywords:
Accident prevention, Aisle between storage shelves, Control systems, Definitions, Dotted lines, Ergonomics, Freight transport, Gangways (buildings), Guideway, Handling, Health and safety requirements, Industrial trucks, Instructions, Marking, Mechanical engineering, Occupational safety, Pedestrians, Powered industrial trucks, Protection, Protection devices, Protection of persons, Safety, Safety distances, Safety engineering, Safety requirements, Shelving, Specification (approval), Speed limits, Stocks, Storage, Storage system, Teaching, Testing, Traffic control, Traffic ways, Training, Warning system, Workplace safety
72,24
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta