Saltar navegación principal
Normas DIN – AENOR
DIN EN 13483:2011-10

DIN EN 13483:2011-10

Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification; German version prEN 13483:2011 / Note: Date of issue 2011-09-19

Tuyaux et flexibles à récupération interne de vapeur pour un système de livraison mesurée carburant - Spécification; Version allemande prEN 13483:2011 / Attention: Date de parution 2011-09-19

Gummi- und Kunststoffschläuche und -schlauchleitungen mit innenliegender Gasrückführung für Zapfsäulen an Tankstellen - Anforderungen; Deutsche Fassung prEN 13483:2011 / Achtung: Erscheinungsdatum 2011-09-19

Fecha Anulación:
2013-09 /Withdrawn
Equivalencias internacionales:

prEN 13483 (2011-09)

Relación con otras normas DIN:

Reemplazada por: DIN EN 13483:2013-09

Resumen:
This European draft standard specifies the requirements for hose assemblies with vapour recovery for delivery systems on petrol filling stations.The hose assemblies with vapour recovery for delivery systems on petrol filling stations shall be capable of withstanding anticipated mechanical, thermal and chemical stressing and shall be resistant to the combustible liquids used in these applications as well as their vapour and vapour air mixtures. The assemblies shall be constructed in such a way that actions during normal operation cannot give rise to dangerous electrostatic charges nor shall there be any reduction in the performance of the vapour recovery.The assemblies are intended for use at ambient temperatures between -30 °C and +55 °C for normal temperature class and -40 °C and +55 °C for low temperature class at a working pressure of less than or equal to 16 bar.Hoses may be constructed from rubber or thermoplastic elastomer (TPE) and this European draft standard specifies the requirements for three types of hoses in two categories and two classes of hose assemblies for measured fuel dispensing systems, including oxygenated fuels (less than or equal to 15 % oxygenated compounds) with internal vapour recovery tubing or hose.
Keywords:
Automotive fuels, Connecting threads, Definitions, Design, Dimensions, Draw-in gas, Flexible pipes, Flow capacity, Flow rates, Flows, Fuel hose, Fuelling, Garages (commercial), Hose assemblies, Marking, Physical properties, Plastics, Plastics hose, Roadside petrol pumps, Rubber hoses, Rubber-sheathed cables, Specification, Specification (approval), Tank installations, Testing, Vulcanized rubber
88,32
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta