Saltar navegación principal
Normas DIN – AENOR
DIN EN 13036-4:2011-12

DIN EN 13036-4:2011-12

Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface - The pendulum test; German version EN 13036-4:2011

Caractéristiques de surface des routes et aérodromes - Méthode d'essai - Partie 4: Méthode d'essai pour mesurer l'adhérence d'une surface: L'essai au pendule; Version allemande EN 13036-4:2011

Oberflächeneigenschaften von Straßen und Flugplätzen - Prüfverfahren - Teil 4: Verfahren zur Messung der Griffigkeit von Oberflächen: Der Pendeltest; Deutsche Fassung EN 13036-4:2011

2011-12 /Active
Equivalencias internacionales:

EN 13036-4 (2011-10)

TS EN 13036-4 (2014-04-16)

Relación con otras normas DIN:
This European Standard describes a method for determining the slip/skid resistance of a surface using a device which remains stationary at the test location. The slip/skid resistance is measured by means of a slider mounted at the end of a pendulum arm. The method provides a measure of the slip/skid resistance properties of a surface either in the field or in the laboratory. This method measures the slip/skid resistance of a small area of a surface (approximately 0,01 m2). This should be considered when deciding its applicability to a surface which may have non-homogeneous surface characteristics, e. g. containing ridges or grooves, or is rough textured (exceeding 1,2 mm mean texture depth). NOTE As the results from this test are taken at one small location, the results cannot be compared with results from devices e. g. mobile devices, that measure the slip/skid resistance over a long length of a surface.
Airfield construction, Airfields, Circulation and space systems (buildings), Construction, Construction materials, Defects, Definitions, Field test, Finishes, Layers, Mathematical calculations, Measurement, Measuring techniques, Pavements (roads), Pendulums, Properties, Road construction, Road superstructure, Road surfaces, Roads, Shearing resistance, Skid resisting properties, Stationary, Surface discontinuities, Surface inspections, Surface layers, Surface properties, Surface roughness, Surfaces, Testing, Unevenness
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta