Saltar navegación principal
Normas DIN – AENOR
DIN EN 10025-6:2011-04

DIN EN 10025-6:2011-04

Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered conditions; German version prEN 10025-6:2011 / Note: Date of issue 2011-03-28

Produits laminés à chaud en aciers de construction - Partie 6: Conditions techniques de livraison pour produits plats des aciers à haute limite d'élasticité à l'état trempé et revenu; Version allemande prEN 10025-6:2011 / Attention: Date de parution 2011-03-28

Warmgewalzte Erzeugnisse aus Baustählen - Teil 6: Technische Lieferbedingungen für Flacherzeugnisse aus Stählen mit höherer Streckgrenze im vergüteten Zustand; Deutsche Fassung prEN 10025-6:2011 / Achtung: Erscheinungsdatum 2011-03-28

Fecha Anulación:
2018-07 /Withdrawn
Equivalencias internacionales:

prEN 10025-6 (2011-03)

Relación con otras normas DIN:

Reemplazada por: DIN EN 10025-6:2018-07

Resumen:
Part 6 of this document, in addition to part 1, specifies requirements for flat products of high yield strength alloy special steels. The grades and qualities are given in Tables 1 to 3 (chemical composition) and Tables 4 to 6 (mechanical properties) and are supplied in the quenched and tempered condition as given in 6.3. The steels specified in this document are applicable to hot-rolled flat products with a minimum nominal thickness of 3 mm and a maximum nominal thickness less or equal 150 mm for grades S460, S500, S550, S620 and S690, a maximum nominal thickness less or equal 100 mm for grade S890 and a maximum nominal thickness less or equal 50 mm for grade S960, in steels which, after quenching and tempering, have a specified minimum yield strength of 460 MPa to 960 MPa.
Keywords:
Acceptance specification, Chemical composition, Definitions, Delivery conditions, Dimensions, Finishes, Grades (quality), Heat-treatable steels, High-tensile steels, Hot-dip metal coating, Marking, Mechanical properties, Order indications, Properties, Quality, Semi-finished products, Sheet materials, Specification (approval), Steel products, Steels, Structural steels, Testing, Wide flats, Yield strength
72,24
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta