Saltar navegación principal
Normas DIN – AENOR
DIN EN 16228-6:2011-03

DIN EN 16228-6:2011-03

Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment; German version prEN 16228-6:2011 / Note: Date of issue 2011-04-18

Equipement de forage et de fondation - Sécurité - Partie 6: Equipement de fonçage au jet d'eau, cémentation, injection; Version allemande prEN 16228-6:2011 / Attention: Date de parution 2011-04-18

Geräte für Bohr- und Gründungsarbeiten - Sicherheit - Teil 6: Geräte für Injektionsarbeiten; Deutsche Fassung prEN 16228-6:2011 / Achtung: Erscheinungsdatum 2011-04-18

Fecha Anulación:
2014-10 /Withdrawn
Equivalencias internacionales:

prEN 16228-6 (2011-02)

Relación con otras normas DIN:

Reemplazada por: DIN EN 16228-6:2014-10

Resumen:
This document specifies the specific safety requirements for jetting, grouting and injection equipment when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer. Rigs for drilling, vibrating, pile driving, to be used for preparing holes for these applications are covered by prEN 16228-2 and/or prEN 16228-4. Jetting, grouting and injection equipment is used in the preparation, transfer and application of grouting materials used for either: - the improvement of ground condition; or - the filling of voids e. g. around piles or ground anchors.
Keywords:
Accident prevention, Boring, Boring equipment (earthworks), Boring system, Building implements, Building machines, Cockpits, Commissioning, Construction, Control devices, Danger zones, Definitions, Drilling (mineral extraction), Drilling works, Earth-moving equipment, Electric energy, Electrical equipment, Electrical hazards, Emission, Energy sources, Energy supply systems (buildings), Equipment, Equipment safety, Ergonomics, Excavations, Filling, Filling methods, Fire risks, Fire safety, Foundation work, Foundations, Grouting work, Handling, Handlings, Hazards, Information, Injection equipment, Injections, Lighting systems, Load cases, Load measurement, Loading, Maintenance, Marking, Mathematical calculations, Measure, Mechanical hazards, Noise control, Noise (environmental), Occupational safety, Operating conditions, Operating instructions, Operating mode, Operation, Protection against accidents, Protection devices, Protective measures, Quarries, Quarrying, Safety, Safety design, Safety devices, Safety engineering, Safety measures, Safety of machinery, Safety regulations, Safety requirements, Safety signs, Sound level, Specification (approval), Stability, Stability against tilting, Stabs, User information, Ventilating aperture, Vibration, Warning devices, Workplace safety
52,9
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta