Saltar navegación principal
Normas DIN – AENOR
DIN EN 15599-1:2010-12

DIN EN 15599-1:2010-12

Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation; German version EN 15599-1:2010

Produits isolants thermiques pour l'équipement du bâtiment et les installations industrielles - Isolation thermique formée en place à base de granulats légers de Perlite expansée (EP) - Partie 1: Spécification de produits liés et en vrac avant mise en oeuvre; Version allemande EN 15599-1:2010

Wärmedämmstoffe für die technische Gebäudeausrüstung und für betriebstechnische Anlagen in der Industrie - An der Verwendungsstelle hergestellte Wärmedämmung mit Produkten aus expandiertem Perlit (EP) - Teil 1: Spezifikation für gebundene und Schüttprodukte vor dem Einbau; Deutsche Fassung EN 15599-1:2010

2010-12 /Active
Equivalencias internacionales:

EN 15599-1 (2010-07)

Relación con otras normas DIN:

Reemplaza a: DIN EN 15599-1:2009-11

This European Standard specifies the requirements for expanded perlite products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately -270 °C to +650 °C. This European Standard specifies the requirements for the four types of expanded perlite products Perlite Aggregate (EPA), Coated Perlite (EPC), Hydrophobic Perlite (EPH) and Premixed Perlite (EPM), containing less than 1 % by mass organic material as determined by Annex C. This European Standard is a specification for the insulation products before installation. This European Standard describes the product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. This European Standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards. This European Standard does not cover factory made insulation products of formed shapes and boards made with expanded perlite, and does not cover products intended to be used for the insulation of buildings. The products covered by this standard are not intended to be used primarily for airborne sound insulation or sound absorption applications although they may improve the performance of the installation in these respects when installed for their primary insulation intended use.
Basic domestic facilities, Bulk materials, Cavity, CE marking, Conformity assessment, Construction, Construction materials, Definitions, Designations, EVT, Grain size, Insulating materials, Labelling, Marking, Perlite, Service installations, Specification (approval), Surface spread of flame, Temperature of use, Testing, Thermal conductivity, Thermal insulating materials
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta