Saltar navegación principal
Normas DIN – AENOR
DIN EN ISO 8130-11:2010-05

DIN EN ISO 8130-11:2010-05

Coating powders - Part 11: Inclined-plane flow test (ISO 8130-11:1997); German version FprEN ISO 8130-11:2010 / Note: Date of issue 2010-04-26

Poudres pour revêtement - Partie 11: Essai d'écoulement sur plain incliné (ISO 8130-11:1997); Version allemande FprEN ISO 8130-11:2010 / Attention: Date de parution 2010-04-26

Pulverlacke - Teil 11: Prüfung des Fließverhaltens auf einer geneigten Platte (ISO 8130-11:1997); Deutsche Fassung FprEN ISO 8130-11:2010 / Achtung: Erscheinungsdatum 2010-04-26

Fecha Anulación:
2011-02 /Withdrawn
Equivalencias internacionales:

FprEN ISO 8130-11 (2010-04)

ISO 8130-11 (1997-06)

Relación con otras normas DIN:

Reemplazada por: DIN EN ISO 8130-11:2011-02

Specifies a method for determining the flow characteristics of a fused thermosetting coating powder down a plane inclined at a set angle to the horizontal. the result of the test described gives an indication of the degree of melt flow that may occur during the curing of the coating powder. This characteristic contributes to the coherence of the coating, to its surface appearance and to the degree of coverage over sharp edges. The test acts as a useful method for checking for batch to batch variation in the behaviour of a given coating powder. Correlation between the results from coating powders of differing composition is not to be expected. This method is unlikely to yield meaningful results with coating powders which have gel times of less than one minute at the test temperature when characterised according to ISO 8130-6.
Abilities to flow, Air, Air quality, Calculation formula, Calorific values, Coating materials, Concentration, Conglomerates, Definitions, Flow analysis, Flow properties, Interpretations, Paints, Particulate materials, Powder, Powder coatings, Powdery, Properties, Sampling methods, Test standards, Testing, Varnishes
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta