Saltar navegación principal
Normas DIN – AENOR
DIN EN ISO 8130-10:2010-05

DIN EN ISO 8130-10:2010-05

Coating powders - Part 10: Determination of deposition efficiency (ISO 8130-10:1998); German version FprEN ISO 8130-10:2010 / Note: Date of issue 2010-04-26

Poudres pour revêtment - Partie 10: Détermination du rendement d'application (ISO 8130-10:1998); Version allemande FprEN ISO 8130-10:2010 / Attention: Date de parution 2010-04-26

Pulverlacke - Teil 10: Bestimmung des Abscheide-Wirkungsgrades (ISO 8130-10:1998); Deutsche Fassung FprEN ISO 8130-10:2010 / Achtung: Erscheinungsdatum 2010-04-26

Fecha Anulación:
2011-02 /Withdrawn
Equivalencias internacionales:

FprEN ISO 8130-10 (2010-04)

ISO 8130-10 (1998-05)

Relación con otras normas DIN:

Reemplazada por: DIN EN ISO 8130-10:2011-02

Specifies a method for determining the percentage by mass of a sprayed coating powder which is actually deposited on a standard test target then powder is sprayed at the target from a spray gun under standard conditions. the method is applicable to powders applied by corona charging or tribo charging. The method may be used to compare the deposition efficiency of different powders with the same gun of different guns with the same powder. This method should only be used for comparison when powders or guns are evaluated consecutively, as the influence of the environment and the equipment can vary significantly with time and location.The results are dependent on the following properties of the powder:a) chemical composition; b) density; c) particle size distribution; d) particle shape; e) flow properties of its mixture in air; f) moisture content and also on the test conditions, including:g) spray pattern produced by the gun; h) gun air pressure; i) gun voltage; j) gun polarity; k) air humidity
Application, Calculation formula, Cloth, Coating materials, Concentration, Definitions, Efficiency, Electrostatics, Evaluations, Instruments, Interpretations, Materials testing, Methods, Ovens, Paints, Particulate materials, Powder, Powder coatings, Productivity, Resistance to blocking, Sampling methods, Separation, Separation efficiency, Shelf life, Strength of materials, Test standards, Test tubes, Testing, Varnishes
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta