Saltar navegación principal
Normas DIN – AENOR
DIN 4753-7:2009-11

DIN 4753-7:2009-11

Water heaters, water heating installations and storage water heaters for drinking water - Part 7: Tanks with a capacity of up to 1000 l, requirements relating to manufacture, thermal insulation and corrosion protection / Note: Date of issue 2009-11-09

Chauffe-eau, installations de chauffe-eau pour eau potable et réservoir-chauffe-eau pour eau potable - Partie 7: Réservoirs d'une capacité jusqu'à 1000 l - Exigences pour la fabrication, l'isolation thermique et la protection contre la corrosion / Attention: Date de parution 2009-11-09

Trinkwassererwärmer, Trinkwassererwärmungsanlagen und Speicher-Trinkwassererwärmer - Teil 7: Behälter mit einem Volumen bis 1000 l, Anforderungen an die Herstellung, Wärmedämmung und den Korrosionsschutz / Achtung: Erscheinungsdatum 2009-11-09

Fecha Anulación:
2011-11 /Withdrawn
Relación con otras normas DIN:

Reemplazada por: DIN 4753-7:2011-11

This draft standard specifies the requirements for the thermal insulation, corrosion protection and manufacturing for unvented (closed) storage water heaters for drinking water with a capacity of up to 1000 l, to be connected to water supply systems having an allowable operating pressure between 0,05 MPa and 1,0 MPa (0,5 bar and 10 bar). They shall be fitted with control- and safety devices which shall be dimensioned so that the allowable operating temperature of the stored drinking water does not exceed 100 °C. It is only applicable to water heaters and water heating installations for drinking water where the formation of an air- or steam cushion of more than 2 % of the content, maximum 10 l, can be safely avoided. If the heating medium has temperatures over 110 °C, the Directive 97/23/EG (Pressure Equipment Directive) applies, which has to be considered then. This draft standard contains specifications which are not covered by the title and scope of DIN EN 12897 "Water supply - Specification for indirectly heated unvented (closed) storage water heaters" and which can be regulated on national level.
Containers, Copper, Copper alloys, Corrosion protection, Inspection, Materials, Metals, Potable water, Service water, Specification (approval), Stainless steels, Steels, Testing, Thermal environment systems, Thermal insulation, Water heaters, Water heating installations
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta