Saltar navegación principal
Normas DIN – AENOR
DIN EN 1071-13:2010-07

DIN EN 1071-13:2010-07

Advanced technical ceramics - Methods of test for ceramic coatings - Part 13: Determination of wear rate by the pin-on-disk method; German version EN 1071-13:2010

Céramiques techniques avancées - Méthodes d'essai pour revêtements céramiques - Partie 13: Détermination du taux d'usure selon la méthode pin-on-disk; Version allemande EN 1071-13:2010

Hochleistungskeramik - Verfahren zur Prüfung keramischer Schichten - Teil 13: Bestimmung der Verschleißrate mittels Stift-Scheibe-Prüfung; Deutsche Fassung EN 1071-13:2010

Fecha:
2010-07 /Active
Equivalencias internacionales:

EN 1071-13 (2010-03)

Relación con otras normas DIN:

Reemplaza a: DIN EN 1071-13:2008-08

Resumen:
This part of EN 1071 specifies a method for evaluating the wear of ceramic coatings by use of a test in which a flat or spherically ended pin is brought, under load, into contact with the flat surface of a disk and the two are set in relative motion such that the pin describes a circular path on the disk. Depending on the conditions being simulated, either the pin or disk or both may be coated with the material under test, with the other member of the couple being selected for its relevance to the system under evaluation. The method specified is suitable for evaluating coatings with a thickness from 1 µm to greaterthan 100 µm, and with suitable choice of conditions might also be applicable to testing thinner coatings.
Keywords:
Abrasion tests, Advanced technical ceramics, Ceramic, Ceramic coatings, Ceramics, Coating thickness, Definitions, Determination, Disks, Friction, Layers, Materials, Materials testing, Mathematical calculations, Pins (nails), Specification (approval), Specimen preparation, Test equipment, Test pulleys, Testing, Wear, Wear rate
77,76
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta