Saltar navegación principal
Normas DIN – AENOR
DIN EN ISO 15156-3:2009-06

DIN EN ISO 15156-3:2009-06

Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO/FDIS 15156-3:2009); English version FprEN ISO 15156-3:2009 / Note: Date of issue 2009-07-20

Industries du pétrole et du gaz naturel - Matériaux pour utilisation dans des environnements contenant de l'hydrogène sulfuré (H<(Index)2>S) dans la production de pétrole et de gaz - Partie 3: ARC (alliages résistants a la corrosion) et autres alliages résistants à la fissuration (ISO/FDIS 15156-3:2009); Version allemande FprEN ISO 15156-3:2009 / Attention: Date de parution 2009-07-20

Erdöl- und Erdgasindustrie - Werkstoffe für den Einsatz in H<(Index)2>S-haltiger Umgebung bei der Öl- und Gasgewinnung - Teil 3: Hochlegierte Stähle (CRAs) und andere Legierungen (ISO/FDIS 15156-3:2009); Deutsche Fassung FprEN ISO 15156-3:2009 / Achtung: Erscheinungsdatum 2009-07-20

Fecha Anulación:
2010-12 /Withdrawn
Equivalencias internacionales:

FprEN ISO 15156-3 (2009-05)

ISO/FDIS 15156-3 (2009-05)

Relación con otras normas DIN:

Reemplazada por: DIN EN ISO 15156-3:2010-12

This part of ISO 15156 gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H<(Index)2>S-containing environments, whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards or regulations. This part of ISO 15156 addresses the resistance of these materials to damage that can be caused by sulfide stress-cracking (SSC), stress-corrosion cracking (SCC) and galvanically-induced hydrogen stress cracking (GHSC). This part of ISO 15156 is concerned only with cracking. Loss of material by general (mass loss) or localized corrosion is not addressed. Table 1 provides a non-exhaustive list of equipment to which this part of ISO 15156 is applicable, including permitted exclusions. This part of ISO 15156 applies to the qualification and selection of materials for equipment designed and constructed using conventional elastic design criteria. For designs utilizing plastic criteria (e. g. strain-based and limit-state designs), see ISO 15156-1:2009, Clause 5. This part of ISO 15156 is not necessarily suitable for application to equipment used in refining or downstream processes and equipment.
Alloy steels, Alloys, Corrosion, Corrosion resistance, Corrosion-resistant materials, Cracking, Cracking (petroleum), Definitions, English language, Environment, Gas extraction, High-alloy steels, Marking, Materials, Materials specification, Natural gas extraction, Natural gas industries, Oil industries, Petroleum, Petroleum extraction, Physical properties, Resistance to crack formation, Specification (approval), Steels, Suitability, Testing
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta