Saltar navegación principal
Normas DIN – AENOR
DIN EN ISO 2376:2009-07

DIN EN ISO 2376:2009-07

Anodizing of aluminium and its alloys - Determination of electric breakdown potential (ISO/DIS 2376:2009); German version prEN ISO 2376:2009 / Note: Date of issue 2009-06-29

Anodisation de l'aluminium et de ses alliages - Détermination de la tension électrique de claquage (ISO/DIS 2376:2009); Version allemande prEN ISO 2376:2009 / Attention: Date de parution 2009-06-29

Anodisieren von Aluminium und Aluminiumlegierungen - Bestimmung der elektrischen Durchschlagspannung (ISO/DIS 2376:2009); Deutsche Fassung prEN ISO 2376:2009 / Achtung: Erscheinungsdatum 2009-06-29

Fecha Anulación:
2010-12 /Withdrawn
Equivalencias internacionales:

ISO/DIS 2376 (2009-07)

prEN ISO 2376 (2009-07)

Relación con otras normas DIN:

Reemplazada por: DIN EN ISO 2376:2010-12

Resumen:
This document describes methods of test for the determination of the electrical breakdown potential of anodic oxidation coatings on aluminium and its alloys on flat or near-flat surfaces and on round wire. The methods are applicable to anodic oxidation coatings used primarily as electrical insulators. The methods are not applicable to coatings in the vicinity of cut edges, the edges of holes, or sharp changes of angle on, for example, extruded shapes. NOTE 1 The methods described do not give satisfactory results for unsealed coatings. NOTE 2 Electrical breakdown potential is affected by relative humidity.
Keywords:
Alloys, Aluminium, Aluminium alloys, Anodic, Anodic coating, Anodic oxidation, Breakdown voltage, Coatings, Electric insulators, Electrical, Inspection, Light metals, Measurement, Measuring techniques, Non-ferrous metals, Non-metallic coatings, Oxide coatings, Protective coat, Round wires, Surface protection, Surface treatment, Surfaces, Test equipment, Testing, Twisting, Voltage
41,68
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta