Saltar navegación principal
Normas DIN – AENOR
DIN EN 13383-1:2009-03

DIN EN 13383-1:2009-03

Armourstone - Part 1: Specification; German version prEN 13383-1:2009 / Note: Date of issue 2009-05-04

Enrochements - Partie 1: Spécifications; Version allemande prEN 13383-1:2009 / Attention: Date de parution 2009-05-04

Wasserbausteine - Teil 1: Anforderungen; Deutsche Fassung prEN 13383-1:2009 / Achtung: Erscheinungsdatum 2009-05-04

Fecha Anulación:
2013-08 /Withdrawn
Equivalencias internacionales:

prEN 13383-1 (2009-02)

Relación con otras normas DIN:

Reemplazada por: DIN EN 13383-1:2013-08

Resumen:
This European Standard specifies the properties of aggregates obtained by processing natural, manufactured or recycled materials and mixtures of these materials for use as armourstone. It provides for the evaluation of conformity of the products to this European Standard. NOTE 1 Armourstone used in construction should comply with all the requirements of this European Standard. As well as familiar and traditional natural and manufactured armourstone Mandate M/125 "Aggregates" included recycled armourstone and some materials from new or unfamiliar sources. Recycled armourstone is included in the standards and new test methods for this is at an advanced stage of preparation. For unfamiliar materials from secondary sources, however, the work on standardisation has only started recently and more time is needed to define clearly the origins and characteristics of these materials. In the meantime such unfamiliar materials when placed on the market as armourstone must comply fully with this standard and national regulations for dangerous substances (see Annex ZA of the standard) depending on their intended use. Additional characteristics and requirements may be specified on a case by case basis depending upon experience of use of the product, and defined in specific contractual documents. NOTE 2 Finer aggregates than specified in this European Standard are used in hydraulic structures. For such aggregates European Standards for other end uses of aggregates should be applied.
Keywords:
Aggregates, Artificial, Bulk density, Component for hydraulic structures, Conformity, Construction, Construction materials, Definitions, Designations, Distribution of mass, Durability, Grain sizing, Hydraulic engineering, Letterings, Marking, Materials, Mineral aggregates, Natural, Natural aggregates, Particle size distribution, Performance tests, Production control, Properties, Quality control, Recycling building material, Rocks, Specification, Specification (approval), Testing, Weights
104,58
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta