Saltar navegación principal
Normas DIN – AENOR
DIN EN 15657-1:2009-10

DIN EN 15657-1:2009-10

Acoustic properties of building elements and of buildings - Laboratory measurement of airborne and structure borne sound from building equipment - Part 1: Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example; German version EN 15657-1:2009

Propriétés acoustiques des éléments de construction et des bâtiments - Mesurage en laboratoire des bruits aériens et de structure des éléments de construction - Partie 1: Cas simplifiés prenant comme exemple les bains bouillonnants; Version allemande EN 15657-1:2009

Akustische Eigenschaften von Bauteilen und von Gebäuden - Messung des Luft- und Körperschalls von haustechnischen Anlagen im Prüfstand - Teil 1: Vereinfachte Fälle, in denen die Admittanzen der Anlagen wesentlich höher sind als die der Empfänger am Beispiel von Whirlwannen; Deutsche Fassung EN 15657-1:2009

Fecha Anulación:
2017-10 /Withdrawn
Equivalencias internacionales:

EN 15657-1 (2009-06)

Relación con otras normas DIN:

Reemplaza a: DIN EN 15657-1:2007-05

Reemplazada por: DIN EN 15657:2017-10

Resumen:
This European Standard specifies methods for the measurement of airborne and structure borne sound produced by building equipment under laboratory conditions. Part 1 of the standard should apply to any source -receiver configuration where the receiver mobility is 10 dB below the sourcemobility (see definition of mobility in section 2 below). However, part 1 is restricted for the moment to whirlpool baths sinceonly this type of building equipment has been experimentally studied so far; for other types of building equipment, the principle of the method is still valid but some details in the standard might not be relevant. Therefore, this first part:- specifies methods for the measurement under laboratory conditions of airborne and structure borne sound produced by whirlpool bathsconnected to low mobility structures. For the case of whirlpool baths, building structures of mass per unit area equal or greater than 220kg/m2, hollow elements excluded, are considered as low mobility elements.- defines the expression of the results, including data for comparison between products (single value descriptors) and input data for theprediction method (link to standard pr EN 12354-5 explained in Annex 2).
Keywords:
Acoustic properties and phenomena, Acoustics, Admittance, Airborne noise, Basic domestic facilities, Baths, Building acoustics, Building services, Buildings, Components, Definitions, Frequency ranges, Installations, Insulations, Materials testing, Mathematical calculations, Measurement, Measurement of airborne noise, Measuring techniques, Noise, Noise control (acoustic), Noise emission, Noise measurement, Noise reduction, Sound, Sound absorption, Sound intensity, Sound levels, Sound pressure, Structure-borne noise, Test furnaces, Testing, Water jet, Whirl bath tubs
77,76
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta