Saltar navegación principal
Normas DIN – AENOR
DIN 802-3:2008-11

DIN 802-3:2008-11

Tolerances on the threaded portion of taps - Part 3: Ground taps for pipe thread (G) according to DIN EN ISO 228-1 and pipe thread (Rp) according to DIN EN 10226-1 - Manufacturing tolerances on the threaded portion

Tolérances de la partie taillée des tarauds - Partie 3: Tarauds à filets recifiés pour filetages au pas gaz (G) selon DIN EN ISO 228-1 et filetages au pas du gaz (Rp) selon DIN EN 10226-1 - Tolérances d'exécution de la partie taillée

Toleranzen des Gewindeteiles von Gewindebohrern - Teil 3: Geschliffene Gewindebohrer für G-Gewinde nach DIN EN ISO 228-1 und Rp-Gewinde nach DIN EN 10226-1 - Fertigungstoleranzen des Gewindeteiles

Fecha Anulación:
2016-03 /Withdrawn
Relación con otras normas DIN:

Reemplaza a: DIN 802-3:2007-09

Reemplazada por: DIN 802-3:2016-03

Reemplaza a: DIN 802-3:1985-06

Resumen:
The standard specifies tolerances for the threaded part of taps with a ground profile (Machine taps and finishing tap) intended for manufacturing internal pipe threads where pressure-tight joints are not made on the threads (symbol G) according to DIN EN ISO 228-1 and whitworth pipe threads for tubes and fittings (symbol Rp) DIN EN 10226-1.
Keywords:
Dimensional tolerances, Dimensions, Drills, Ground, G-series screw threads, Internal threads, Limit deviations, Limits (mathematics), Manufacturing, Mathematical calculations, Outside diameters, Pipe threads, Pitch diameter, Taps (threading), Threaded components, Threads, Tolerance zones, Tolerances (measurement), Tolerancing, Tools
47,01
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta