Saltar navegación principal
Normas DIN – AENOR
DIN EN 1093-11:2008-11

DIN EN 1093-11:2008-11

Safety of machinery - Evaluation of the emission of airbone hazardous substances - Part 11: Decontamination index; German version EN 1093-11:2001+A1:2008 / Note: DIN EN 1093-11 (2001-10) remains valid alongside this standard until 2009-12-28.

Sécurité des machines - Évaluation de l'émission de substances dangereuses par l'air - Partie 11: Indice d'assainissement; Version allemande EN 1093-11:2001+A1:2008 / Attention: DIN EN 1093-11 (2001-10) reste valable avec la présente norme jusqu'à 2009-12-28.

Sicherheit von Maschinen - Bewertung der Emission von luftgetragenen Gefahrstoffen - Teil 11: Reinigungsindex; Deutsche Fassung EN 1093-11:2001+A1:2008 / Achtung: Daneben gilt DIN EN 1093-11 (2001-10) noch bis 2009-12-28.

Fecha:
2018-11 /Active
Equivalencias internacionales:

EN 1093-11+A1 (2008-07)

TS EN 1093-11+A1 (2011-04-12)

Relación con otras normas DIN:
Resumen:
This standard describes a method for the measurement of the decontamination index of pollution control systems e. g. capture devices including local exhaust ventilation, water spray systems and, when appropriate, separation equipment installed on a machine. This method uses the real pollutant (see 4.2 of EN 1093-1: 1998 " Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods") and can be operated in room or field environments. It should be observed that during the test, especially during the shutdown or the removal of the pollution control system, the concentration of hazardous substances, if present, can reach levels which are liable to incur a risk to the health of the operators or other occupants present in the room. Warning: This standard does not deal with the protective measures required to control these risks. Measurement of the decontamination index of pollution control system can serve for the: evaluation of the performance of a pollution control system of a machine; evaluation of the improvement of a pollution control system; comparison of pollution control systems for machines of similar design; ranking of pollution control systems according to their decontamination efficiency; determination of the air flow rate in the case of an exhaust system to achieve a given level; determination of the state of the art of pollution control systems for machines with respect to the decontamination efficiency.
Keywords:
Air, Air cleaning equipment, Air purification, Atmospheric pollutants, CE marking, Cleaning capability, Closed test rooms, Concentration values, Dangerous stuffs, Definitions, Efficiency, Emission, Emission values, Equipment safety, Evaluations, Impurities, Machines, Measurement, Measuring techniques, Methods, Pollutant concentration, Pollutant emissions, Pollutants, Pollution of the air, Ratings, Safety, Safety of machinery, Selection, Testing
52,9
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta