Saltar navegación principal
Normas DIN – AENOR
DIN EN 1071-13:2008-08

DIN EN 1071-13:2008-08

Advanced technical ceramics - Methods of test for ceramic coatings - Part 13: Determination of wear rate by the pin-on-disk method; German version prEN 1071-13:2008 / Note: Date of issue 2008-08-11

/ Attention: Date de parution 2008-08-11

Hochleistungskeramik - Verfahren zur Prüfung keramischer Schichten - Teil 13: Bestimmung der Verschleißrate mittels Stift-Scheibe-Prüfung; Deutsche Fassung prEN 1071-13:2008 / Achtung: Erscheinungsdatum 2008-08-11

Fecha Anulación:
2010-07 /Withdrawn
Equivalencias internacionales:

prEN 1071-13 (2008-07)

Relación con otras normas DIN:

Reemplazada por: DIN EN 1071-13:2010-07

Resumen:
This part of EN 1071 specifies a method for evaluating the wear of ceramic coatings by use of a test in which a flat or spherically ended pin is brought, under load, into contact with the flat surface of a disk and the two are set in relative motion such that the pin describes a circular path on the disk. Depending on the conditions being simulated, either the pin or disk or both may be coated with the material under test, with the other member of the couple being selected for its relevance to the system under evaluation. The method specified is suitable for evaluating coatings with a thickness from 1 µm to greaterthan 100 µm, and with suitable choice of conditions might also be applicable to testing thinner coatings.
Keywords:
Abrasion tests, Advanced technical ceramics, Ceramic, Ceramic coatings, Ceramics, Coating thickness, Definitions, Determination, Disks, Friction, Layers, Materials, Materials testing, Mathematical calculations, Pins (nails), Specification (approval), Specimen preparation, Test equipment, Test pulleys, Testing, Wear, Wear rate
77,76
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta