Saltar navegación principal
Normas DIN – AENOR
DIN EN 1012-3:2008-04

DIN EN 1012-3:2008-04

Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors; German version prEN 1012-3:2008 / Note: Date of issue 2008-06-09

Compresseurs et pompes à vide - Prescription de sécurité - Partie 3: Compresseurs de procédé; Version allemande prEN 1012-3:2008 / Attention: Date de parution 2008-06-09

Kompressoren und Vakuumpumpen - Sicherheitsanforderungen - Teil 3: Prozesskompressoren; Deutsche Fassung prEN 1012-3:2008 / Achtung: Erscheinungsdatum 2008-06-09

Fecha Anulación:
2013-01 /Withdrawn
Equivalencias internacionales:

prEN 1012-3 (2008-04)

Resumen:
This part of EN 1012 is applicable to compressors having an operating pressure greater than 0,5 bar and designed to utilise all gases other than air, nitrogen or inert gases which are covered in part 1. The standard lists the significant hazards associated with compressors and specifies safety requirements applicable to the design, installation, operation, maintenance and dismantling of compressors during their foreseeable lifetime and subsequent disposal.This part of EN 1012 includes under the general term compressors, those machines which comprise;- the compressor itself- a prime mover- any component or device supplied which is necessary for safe operation of the compressor.In addition it applies to partly completed compressors having a compressor in combination with some of these components as well as compressor assemblies operating in combination.Excluded are refrigerant compressors used in refrigerating systems or heat pumps as defined in EN 378-1.
Keywords:
Accident prevention, Compressors, Construction, Definitions, Design, Electrical safety, Ergonomics, Failure, Gas compressor, Hazards, Installation, Leak tests, Maintenance, Marking, Mechanical safety, Nameplates, Noise emissions, Operating instructions, Pressure tests, Prime movers, Protection against electric shocks, Protective devices, Safety, Safety engineering, Safety measures, Safety of machinery, Safety requirements, Specification (approval), Testing, Thermal, Types, Verification
88,32
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta