Saltar navegación principal
Normas DIN – AENOR
DIN EN 14638-3:2008-04

DIN EN 14638-3:2008-04

Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods; German version prEN 14638-3:2008 / Note: Date of issue 2008-04-14

Bouteilles à gaz transportables - Récipients soudés rechargeables d'une capacité inférieure ou égale à 150 litres - Partie 3: Bouteilles en acier carbone soudées conçues par des méthodes expérimentales; Version allemande prEN 14638-3:2008 / Attention: Date de parution 2008-04-14

Ortsbewegliche Gasflaschen - Wiederbefüllbare geschweißte Gefäße mit einem Fassungsraum von nicht mehr als 150 Liter - Teil 3: Flaschen aus geschweißtem Kohlenstoffstahl, ausgelegt nach experimentellen Verfahren; Deutsche Fassung prEN 14638-3:2008 / Achtung: Erscheinungsdatum 2008-04-14

Fecha Anulación:
2010-12 /Withdrawn
Equivalencias internacionales:

prEN 14638-3 (2008-03)

Relación con otras normas DIN:

Reemplaza a: DIN EN 14638-3:2006-03

Resumen:
This European Standard gives minimum requirements concerning material, design, construction and workmanship, procedures and tests at manufacture of refillable transportable welded cylinders made of carbon steel, justified by experimental methods, of water capacities from 0,5 l up to and including 150 l for compressed or liquefied gases and of a test pressure up to 90 bar.
Keywords:
Acceptance inspection, Approval, Batch testing, Bottles, Bursting tests, Capacity, Carbon steels, Charpy, Charpy impact tests, Compressed gas equipment, Compressed gases, Construction type requirements, Containers, Definitions, Design, Design data, Examination (quality assurance), Experimental, Fatigue analysis, Forms (paper), Functional capability, Gas cylinders, Gas holders, Gas pressure vessels, Gases, Heat treatment, Impact testing, Leak tests, Liquefied petroleum gas, Manufactured gas, Marking, Materials, Mathematical calculations, Mechanical testing, Methods, Methods of calculation, Methods of manufacture, Minimum requirements, Mobile, Non-destructive testing, Notched-bar impact bending tests, Patterns, Portable, Pressure, Pressure tests, Principles of design, Production, Production control, Qualification tests, Refillable, Re-usable, Seamless, Specification (approval), Stainless steels, Steel cylinders, Steels, Stress, Tensile strength, Tensile testing, Test pressure, Testing, Types, Verification, Visual inspection (testing), Welded, Welding, Welds
97,76
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta