Saltar navegación principal
Normas DIN – AENOR
DIN EN 1906:2008-01

DIN EN 1906:2008-01

Building hardware - Lever handles and knob furniture - Requirements and test methods; German version prEN 1906:2007 / Note: Date of issue 2008-01-08

Quincaillerie pour le bâtiment - Béquilles et boutons de porte - Prescriptions et méthodes d'essais; Version allemande prEN 1906:2007 / Attention: Date de parution 2008-01-08

Schlösser und Baubeschläge - Türdrücker und Türknäufe - Anforderungen und Prüfverfahren; Deutsche Fassung prEN 1906:2007 / Achtung: Erscheinungsdatum 2008-01-08

Fecha Anulación:
2010-09 /Withdrawn
Equivalencias internacionales:

prEN 1906 (2007-11)

Relación con otras normas DIN:

Reemplazada por: DIN EN 1906:2010-09

Resumen:
This European Standard specifies test methods and requirements for spindle and fastening elements, operating torques, permissible free play and safety, free angular movement and misalignment, durability, static strength and corrosion resistance for sprung and unsprung lever handles and knobs for doors on backplates or roses. This standard is applicable only to lever handles and knobs that operate a latch or a lock. It states four categories of use according to the frequency and other conditions of use. Compliance with this European Standard ensures a margin of strength in excess of that needed for normal operation. Additional requirements are needed for special safety furniture which is suitable for use in situations where there is a high risk of falling. Since special safety furniture is not essential in every situation, this European Standard provides for additional safety requirements (see 5.13) which are only necessary when the manufacturer states that the safety furniture is claimed to conform to these requirements. This standard states five grades of security. Grade 0 according to requirements stated in the main part of this standard. Grades 1 to 4 are stated according to requirement for security lock furniture for use on burglary resistant doors (see annex A). These additional security requirements are necessary only when the manufacturer states that the products are claimed to have a high level of security, which is not essential in every situation. The suitability of lock or latch furniture for use on fire/smoke door assemblies is determined by fire performance tests conducted in addition to the performance tests required by this standard. Since suitability for use on fire/smoke door assemblies is not essential in every situation, the manufacturer has the option of stating whether the furniture is claimed to conform to these additional requirements or not. If so stated the additional requirements given in annex C are necessary.
Keywords:
Classification, Clearances, Construction, Corrosion resistance, Definitions, Dimensions, Door handles, Door locks, Doors, Durability, Hardware, Ironmongery (buildings), Latch pins, Locking and locating devices, Marking, Materials, Moment, Operating torque, Operating torques, Operation, Permanent performance capability, Safety, Safety requirements, Security plates, Small iron-work, Sneck mountings, Specification (approval), Strength of materials, Testing, Testing devices
109,53
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta