Saltar navegación principal
Normas DIN – AENOR
DIN EN 10253-4:2008-06

DIN EN 10253-4:2008-06

Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements; German version EN 10253-4:2008 / Note: To be replaced by DIN EN 10253-4 (2017-11).

Raccords à souder bout à bout - Partie 4: Aciers inoxydables austénitiques et austéno-ferritiques avec contrôle spécifique; Version allemande EN 10253-4:2008 / Attention: À remplacer par DIN EN 10253-4 (2017-11).

Formstücke zum Einschweißen - Teil 4: Austenitische und austenitisch-ferritische (Duplex-)Stähle mit besonderen Prüfanforderungen; Deutsche Fassung EN 10253-4:2008 / Achtung: Vorgesehener Ersatz durch DIN EN 10253-4 (2017-11).

2018-06 /Active
Equivalencias internacionales:

EN 10253-4 (2008-03)

Relación con otras normas DIN:

Reemplaza a: DIN EN 10253-4:2003-07

Reemplaza a: DIN 2616-2:1991-02

Reemplaza a: DIN 2605-2:1995-06

Reemplaza a: DIN 2615-1:1992-05

Reemplaza a: DIN 2615-2:1992-05

Reemplaza a: DIN 2617:1991-02

Reemplaza a: DIN 2616-1:1991-02

Reemplaza a: DIN 2605-1:1991-02

Reemplaza a: DIN 2609:1991-02

This European Standard specifies the technical delivery requirements for seamless and welded butt-welding fittings (elbows, concentric and eccentric reducers, equal and reducing tees, caps) made of austenitic and austenitic-ferritic (duplex) stainless steel which are intended for pressure and corrosion resisting purposes at room temperature, at low temperature or at elevated temperatures. It specifies: the type of fittings; type A (see 7.2) type B (see 7.3) the steel grades; the mechanical properties; the dimensions and tolerances; the requirements for inspection and testing; the inspection documents; the marking; the handling and packaging. NOTE In the case of a harmonised supporting standard for materials, presumption of conformity to the Essential Requirement(s) (ESRs) is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific item of equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive (PED) are satisfied. Unless otherwise specified in this European Standard the general technical delivery requirements in DIN EN 10021 apply.
Acceptance specification, Alloy steels, Austenitic steels, Bend couplings, CE marking, Chemical composition, Definitions, Delivery conditions, Dimensions, Ferritic steels, Finishes, Fittings, Inspection, Manufacturing process, Marking, Mechanical properties, Metals, Packages, Pipe fittings, Pipe tees, Production, Properties, Reducers, Seamless, Seamless pipes, Stainless steels, Steel grades, Steels, Strength of materials, Testing, Testing conditions, Testing requirements, Tolerances (measurement), Unalloyed steels, Weld in
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta