Saltar navegación principal
Normas BSI – AENOR
BS EN 1971-2:2019

BS EN 1971-2:2019

Copper and copper alloys. Eddy current test for measuring defects on seamless round copper and copper alloy tubes. Test with an internal probe on the inner surface

2019-12-03 /Definitive
Equivalencias internacionales:

EN 1971-2

Relación con otras normas BSI:

Reemplaza a: BS EN 1971-2:2011


This document specifies a procedure for the eddy current test with an internal probe for measuring defects on the inner surface of seamless round copper and copper alloy tubes.

This document applies particularly for finned tubes with high fins according to EN 12452.


The eddy current test method(s) required, together with the size range and acceptance level, are defined in the relevant product standard.

The choice of the method for eddy current test:

  • with an encircling test coil on the outer surface according to EN 1971?1


  • with an internal probe on the inner surface according to EN 1971?2

is at the discretion of the manufacturer if there are no other agreements between the purchaser and the supplier.

Especially for finned tubes according to EN 12452 with high fins, it is suggested to use eddy current test with internal probe as described in this document.

Non-ferrous alloys, Seamless pipes, Pipes, Acceptance (approval), Adjustment, Eddy-current tests, Test equipment, Control samples, Testing conditions, Copper, Copper alloys, Non-destructive testing, Defects
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta