Saltar navegación principal
Normas BSI – AENOR
BS EN ISO 13163:2019

BS EN ISO 13163:2019

Water quality. Lead-210. Test method using liquid scintillation counting

2019-08-16 /Revision Underway
Equivalencias internacionales:

EN ISO 13163:2019

ISO 13163:2013

ISO 13163 specifies the determination of lead-210 (210Pb) activity concentration in samples of all types of water using liquid scintillation counting (LSC). For raw and drinking water, the sample should be degassed in order to minimize the ingrowth of 210Pb from radon-222 (222Rn). Using currently available liquid scintillation counters, this test method can measure the 210Pb activity concentrations in the range of less than 20 mBq?l-1 to 50 mBq?l-1. These values can be achieved with a counting time between 180 min and 720 min for a sample volume from 0,5 l to 1,5 l. Higher 210Pb activity concentrations can be measured by either diluting the sample or using smaller sample aliquots or both. It is the laboratory's responsibility to ensure the suitability of this test method for the water samples tested.
Quality, Lead, Flame photometry, Spectroscopy, Calibration, Determination of content, Atomic absorption spectrophotometry, Sampling methods, Specimen preparation, Water resources, Toxic solids, Water testing, Chelating agents, Reproducibility, Testing conditions, Water, Concentration (chemical), Trace element analysis, Chemical analysis and testing, Extraction methods of analysis
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta