Saltar navegación principal
Normas BSI – AENOR
BS EN 10139:2016+A1:2020

BS EN 10139:2016+A1:2020

Cold rolled uncoated low carbon steel narrow strip for cold forming. Technical delivery conditions

2020-04-15 /Definitive
Equivalencias internacionales:

EN 10139:2016/A1

Relación con otras normas BSI:

Reemplaza a: BS EN 10139:1998

1.1 This European Standard applies to cold rolled narrow strip in coils and cut lengths in thicknesses up to 10 mm and of widths less than 600 mm, made from low carbon, unalloyed and alloyed steels in accordance with Table 1. These products are suitable for cold forming. They are also suitable for surface coating. On the other hand, they are not suitable for hardening treatment followed by tempering. 1.2 This European Standard does not cover cold rolled flat products for which a separate standard already exists, particularly the following products: - cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state (EN 10106); - grain-oriented electrical steel sheet and strip delivered in the fully processed state (EN 10107); - cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state (EN 10341); - cold rolled narrow steel strip for heat treatment (EN 10132 1 to ?4); - cold rolled steel flat products with higher yield strength for cold forming (EN 10268); - cold rolled low carbon steel flat products for cold forming (EN 10130); - cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steel (EN 10205); - cold rolled low carbon steel flat products for vitreous enamelling (EN 10209).
Inspection, Surface texture, Classification systems, Coatings, Alloy steels, Unalloyed steels, Yield strength, Tensile strength, Test equipment, Strips, Strain measurement, Thickness, Corrosion protection, Delivery, Chemical composition, Width, Designations, Specimen preparation, Elongation at fracture, Steels, Surface properties, Mechanical properties of materials, Hardness, Rolling, Ordering, Cold-working, Surface defects, Finishes, Low-carbon steels
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta