Saltar navegación principal
Normas BSI – AENOR
BS EN IEC 60793-1-32:2018

BS EN IEC 60793-1-32:2018

Optical fibres. Measurement methods and test procedures. Coating strippability

Fecha:
2019-01-11 /Definitive
Comité:
GEL/86/1
Equivalencias internacionales:

EN IEC 60793-1-32:2018

IEC 60793-1-32:2018

Relación con otras normas BSI:

Reemplaza a: BS EN 60793-1-32:2010

Resumen:

This part of IEC 60793 is intended primarily for testing either fibres as produced by a fibre manufacturer or subsequently overcoated (tight buffered) using various polymers. The test can be performed either on fibres as produced, or after exposure to various environments.

This test applies to A1, A2, A3, B and C fibres with a nominal glass dimension of 125 µm.

The object of this document is to establish uniform requirements for the mechanical characteristic – coating strippability. This test quantifies the force required to mechanically remove the protective coating from optical fibres along their longitudinal axis.

This test is not intended as a means to maximize fibre strength after the coating is removed nor is it intended to specify the best conditions for field stripping of optical fibres.

This test is designed for optical fibres having polymeric coatings with nominal outer diameters in the range of 200 µm to 900 µm.

Keywords:
Mechanical testing, Fibre optic cables, Specimen preparation, Fibre optics, Optical fibres, Optical communication systems, Coatings, Electronic equipment and components, Stripping, Environmental testing, Optical measurement, Force measurement, Test methods, Protective coatings
143,39
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta