Saltar navegación principal
Normas BSI – AENOR
BS IEC 62153-4-16:2016

BS IEC 62153-4-16:2016

Metallic communication cable test methods. Electromagnetic compatibility (EMC). Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial set-up

2016-11-30 /Revision Underway
Equivalencias internacionales:

IEC 62153-4-16 Ed. 1.0

IEC 62153-4-16:2016

IEC 62153-4-16:2016(E) describes a method to extrapolate the test results of transfer impedance to higher frequencies and the test results of screening attenuation to lower frequencies when measured with the triaxial set-up according to IEC 62153-4-3 (method B) respectively IEC 62153-4-4. A similar approach to extrapolate the test results of transfer impedance to higher frequencies was already described in IEC 61196-1:1995 Subclause 12.2. This method is applicable for homogenous screens, i.e. screens having a transfer impedance directly proportional to length. The transfer impedance may have any frequency behaviour, i.e. it could have a behaviour where it does not increase with 20 dB per decade as observed for screens made of a foil and a braid.
Shielded cables, Braid shieldings, Electrical measurement, Electromagnetic compatibility, Noise (spurious signals), Communication cables, Braided conductors, Coaxial cables, Metals, Cable shieldings, Electric cables
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta