BS ISO 11171:2016

2020-11-20 /Withdrawn

23.100.60 - Filters, seals and contamination of fluids

75.120 - Hydraulic fluids

MCE/18/-/6

ISO 11171:2016

Reemplaza a: BS ISO 11171:2010

Reemplazada por: BS ISO 11171:2020

This International Standard specifies procedures for the following:

1. primary particle-sizing calibration, sensor resolution and counting performance of automatic particle counters (APCs) for liquids capable of analysing bottle samples;

2. secondary particle-sizing calibration using suspensions verified with a primary calibrated APC;

3. establishing acceptable operation and performance limits;

4. verifying particle sensor performance using a truncated test dust;

5. determining coincidence and flow rate limits.

This International Standard specifies procedures for the following:

1. primary particle-sizing calibration, sensor resolution and counting performance of automatic particle counters (APCs) for liquids capable of analysing bottle samples;

2. secondary particle-sizing calibration using suspensions verified with a primary calibrated APC;

3. establishing acceptable operation and performance limits;

4. verifying particle sensor performance using a truncated test dust;

5. determining coincidence and flow rate limits.

Test specimens, Technical data sheets, Identification methods, Test equipment, Size classification, Data representation, Automatic, Contaminants, Measuring instruments, Error analysis, Hydraulic fluids, Counting, Hydraulic transmission systems, Verification, Flow rates, Calibration, Resolution, Particle size distribution, Flow measurement, Particle size measurement, Dust, Working fluids, Suspensions (chemical), Liquids, Performance, Particulate materials, Accuracy, Testing conditions, Mathematical calculations