Saltar navegación principal
Normas BSI – AENOR
BS EN ISO 6185-4:2011

BS EN ISO 6185-4:2011

Inflatable boats. Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater

Fecha Anulación:
2018-10-17 /Withdrawn
Comité:
GME/33
Equivalencias internacionales:

EN ISO 6185-4:2011

ISO 6185-4:2011

Relación con otras normas BSI:

Reemplazada por: BS EN ISO 6185-4:2018

Resumen:

This part of ISO 6185 specifies the minimum safety characteristics required for the design, materials, manufacture and testing of rigid inflatable boats (RIBs) with a hull length of between 8 m and 24 m and with a motor power rating of 15 kW and greater.

This part of ISO 6185 is applicable to Type IX and Type X RIBs intended for use within the operating temperatures of -20 °C to +60 °C.

  • Type IX: Powered boats, fitted with a buoyancy tube covering at least 85 % of the port and starboard sides, suitable for navigation in inshore and sheltered waters, up to and including wind force 6 Beaufort and significant wave heights up to 2 m (design categories C and D), with a hull length of between 8 m and 24 m and with a motor power rating of 15 kW and greater.

  • Type X: Powered boats, fitted with a buoyancy tube covering at least 85 % of the port and starboard sides, suitable for navigation in waters, up to wind force 8 Beaufort and significant wave heights up to 4 m (design category B), with a hull length of between 8 m and 24 m and with a motor power rating of 75 kW and greater.

NOTE 1

General arrangements of typical boats of Types IX and X are given in Annexes A and B, respectively.

NOTE 2

For boats with power ratings of 4,5 kW and less, refer to ISO 6185-1 . For boats with power ratings of 4,5 kW to 15 kW inclusive, refer to ISO 6185-2 . For boats with a hull length of less than 8 m and power rating of 15 kW and greater, refer to ISO 6185-3 .

Boats outside these types or outside of Type IX and Type X, as defined, are outside of the scope of ISO 6185 .

NOTE 3

For inflatable boats with a hull length greater than 8 m, it is suggested to use the requirements of ISO 6185-3 .

Keywords:
Ratings, Performance testing, Water transport engineering components, Shipbuilding, Marine safety, Environmental testing, Marine engines, Rated power, Safety measures, Buoyancy, Inflatable devices, Boats, Inflatable boats, Dimensions, Water transport engineering
235,38
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta