Saltar navegación principal
Normas BSI – AENOR
BS EN 50607:2015

BS EN 50607:2015

Satellite signal distribution over a single coaxial cable. Second generation

2015-01-31 /Confirmed
Equivalencias internacionales:

EN 50607:2015

Relación con otras normas BSI:

Reemplaza a: PD CLC/TS 50607:2013


This European Standard describes:

  • the system physical structure;

  • the system control signals, which implement a set of messages using DiSEqC physical layer but not the DiSEqC message structure;

  • the definition of identified configurations;

  • the management of the potential collisions in the control signals traffic.

Figure 1 illustrates the physical system configuration considered in this standard.

Several satellite signal demodulators can receive signals from any of the input signal banks (Bank 1, Bank 2, Bank M, with M = 256) of the LNB or the switch. The signals selected by the demodulators (or receivers) are transported via a single cable to these demodulators (Receiver 1, Receiver 2, Receiver N, with N = 32).

To achieve these single cable distributions, the Single Cable Interface (SCIF, likely embedded in a LNB or a Switch) features some specific functions and characteristics.

[Image removed.]

Coaxial cables, Broadcasting networks, Messages, Domestic facilities, Communication cables, Communication equipment, Video signals, Telecommunication transmission methods, Wire transmission (telecommunication), Control signals, Satellite links, Telecommunication systems, Cable television, Interfaces
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta