Saltar navegación principal
Normas BSI – AENOR
BS EN 694:2014

BS EN 694:2014

Fire-fighting hoses. Semi-rigid hoses for fixed systems

Fecha:
2014-08-31 /Under Review
Comité:
FSH/17
Equivalencias internacionales:

EN 694:2014

Relación con otras normas BSI:

Reemplaza a: BS EN 694:2001

Resumen:

This European Standard specifies the requirements and test methods for semi-rigid hoses for fire-fighting purposes for use with fixed systems. The hoses are intended for use at a maximum working pressure of 1,2 MPa for hoses of 19 mm and 25 mm inside diameter and 0,7 MPa for hoses of 33 mm inside diameter.

Hoses conforming to this European Standard are intended for applications where long intervals can occur between the occasions of use, for example on fixed fire hose reels in buildings and other construction works.

This European Standard applies exclusively to hoses for fire-fighting purposes intended for use at ambient conditions in non-aggressive or non-corrosive atmospheres within the temperature range -20 °C to +60 °C.

NOTE 1

Hoses for use at ambient temperatures below -20°C can be supplied if they have been tested at the specified lower temperature in accordance with 6.4 and identified by their marking in Clause 8 f).

NOTE 2

All pressures are expressed in megapascals. 1 MPa = 10 bar

Keywords:
Marking, Fire hose reels, Service pressure, Firefighting equipment, Firefighting, Performance testing, Working range, Flexible pipes, Pressure equipment, Dimensional tolerances, Fire hoses, Emergency equipment, Testing conditions, Diameter, Temperature
145,9
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta