Saltar navegación principal
Normas BSI – AENOR
BS EN 60099-9:2014

BS EN 60099-9:2014

Surge arresters. Metal-oxide surge arresters without gaps for HVDC converter stations

Fecha:
2014-09-30 /Definitive
Comité:
PEL/37
Equivalencias internacionales:

EN 60099-9:2014

IEC 60099-9:2014

Resumen:
IEC 60099-9:2014 applies to non-linear metal-oxide resistor type surge arresters without spark gaps designed to limit overvoltages in HVDC converter stations of two terminal, multiterminal and back-to-back type up to and including an operating voltage of 1 100 kV. The standard applies in general to porcelain-housed and polymer-housed type arresters but also to gas-insulated metal enclosed arresters (GIS-arresters) solely used as d.c. bus and d.c. line/cable arresters. Arresters for voltage source converters are not covered. Arresters applied on the a.c. systems at the converter station and subjected to power-frequency voltage of 50 or 60 Hz principally without harmonics are tested as per IEC 60099-4. The arresters on a.c.-filters are tested according to this standard. Keywords: testing of gapless metal-oxide surge arrestors for HVDC converter stations
Keywords:
Surge protection, Electrical protection equipment, Overhead power lines, Withstand voltage, Short-circuit current tests, Overvoltage protection, Thermal testing, High-voltage tests, Alternating current, Metals, Lightning protection, Surge limiters, Impulse-voltage tests, Overvoltage tests, Approval testing, Oxides, Ratings, Electric insulators, Electrical testing
302,03
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta