Saltar navegación principal
Normas BSI – AENOR
BS EN 60974-4:2011

BS EN 60974-4:2011

Arc welding equipment. Periodic inspection and testing

Fecha Anulación:
2016-11-30 /Withdrawn
Equivalencias internacionales:

EN 60974-4:2011

IEC 60364-7-704:2017

IEC 60974-4:2010

Relación con otras normas BSI:

Reemplazada por: BS EN 60974-4:2016

Reemplaza a: BS EN 60974-4:2007

IEC 60974-4:2010 specifies test procedures for periodic inspection and, after repair, to ensure electrical safety. These test procedures are also applicable for maintenance. This standard is applicable to power sources for arc welding and allied processes designed in accordance with IEC 60974-1 or IEC 60974-6. Stand-alone ancillary equipment designed in accordance with other part of IEC 60974 may be tested in accordance with relevant requirement of this part of IEC 60974. This second edition cancels and replaces the first edition published in 2006. It constitutes a technical revision. The main significant technical changes with respect to the previous edition are the following:
- title is amended;
- scope is extended to equipment designed in accordance with IEC 60974-6;
- complementary instructions from the manufacturer shall be followed;
- qualification of test personnel is clarified (see 4.1);
- plasma cutting power sources are excluded from no-load voltage test (see 5.6);
- voltage reducing device functional test is simplified (see 6.3);
- supply voltage is recorded in test report (see 7.1).
Welding equipment, Arc-welding equipment, Personnel, Electrical safety, Arc welding, Repair, Welding, Maintenance, Electric power systems, Visual inspection (testing), Inspection, Electrical testing
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta