Saltar navegación principal
Normas BSI – AENOR
BS EN 777-1:2009

BS EN 777-1:2009

Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use. System D. Safety

Fecha Anulación:
2019-11-06 /Withdrawn
Equivalencias internacionales:

EN 777-1:2009

Relación con otras normas BSI:

Reemplaza a: BS EN 777-1:1999

Reemplazada por: BS EN 416:2019

This European Standard specifies the requirements and test methods for the construction, safety, classification and marking of non-domestic gas-fired overhead radiant tube heaters incorporated into a multi-burner system (called system D and referred to in the body of the text as the “ system”) with each burner unit under the control of an automatic burner control system. This standard is applicable to Type B52 systems (see 4.3) intended for use in other than domestic dwellings, in which the supply of combustion air and/or the evacuation of the products of combustion is achieved by mechanical means. This standard is not applicable to: a) systems designed for use in domestic dwelling; b) outdoor systems; c) systems of heat input in excess of 120 kW (based on the net calorific value of the appropriate reference test gas); d) systems having a draught diverter; e) systems having fully pre-mixed gas and air burners in which: 1) either the gas and all the combustion air are brought together just before the level of the combustion zone; or 2) the pre-mixing of the gas and all combustion air is carried out in a part of the burner upstream of the combustion zone; f) systems that are designed for continuous condensation within the flue system under normal operating conditions; g) systems having combustion products evacuation ducts that are non-metallic. This standard is applicable to systems which are intended to be type tested. It also includes requirements concerning the evaluation of conformity, including factory production control, but these requirements only apply to POCEDs and their associated terminals. NOTE Requirements for systems which are not intended to be type tested would need to be subject to further consideration. Requirements concerning the rational use of energy have not been included in this European Standard.
Packaging, Gases, Temperature measurement, Burners, Flames, Symbols, Flues, Marking, Performance testing, Gas space heating, Control devices, Thermal testing, Maintenance, Air heaters, Temperature, Equivalence, Equipment safety, Instructions for use, Overhead, Combustion, Conversion, Mathematical calculations, Safety measures, Multiple, Controllers, Air intakes, Radiant heaters, Testing conditions, Heaters, Industrial, Valves, Heating equipment, Gas-powered devices, Ignition, Flow rates, Test pressure, Gaseous fuels, Electrical equipment, Commercial, Classification systems
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta