Saltar navegación principal
Normas BSI – AENOR
BS EN 10083-2:2006

BS EN 10083-2:2006

Steels for quenching and tempering. Technical delivery conditions for non alloy steels

Fecha Anulación:
2018-06-21 /Withdrawn
Equivalencias internacionales:

EN 10083-2:2006

Relación con otras normas BSI:

Reemplazada por: BS EN ISO 683-1:2018

Reemplaza a: BS EN 10083-2:1991

This part of EN 10083, in addition to Part 1, specifies the technical delivery requirements for: semi-finished products, hot formed, e.g. blooms, billets, slabs (see NOTES 2 and 3 in EN 10083-1:2006, Clause 1), bars (see NOTE 2 in EN 10083-1:2006, Clause 1), rod, wide flats, hot-rolled strip and sheet/plate, forgings (see NOTE 2 in EN 10083-1:2006, Clause 1), manufactured from the direct hardening non alloy steels for quenching and tempering and the non alloy flame and induction hardening steels and supplied in one of the heat treatment conditions given for the different types of products in Table 1, lines 2 to 7, and in one of the surface conditions given in Table 2. The steels are generally intended for the manufacture of quenched and tempered, flame or induction hardened machine parts, but can also be used in the normalized condition. The requirements for mechanical properties given in this document are restricted to the sizes given in Table 9 and Table 10. NOTE This document does not apply for bright steel products. For bright steel products EN 10277-1 and EN 10277-5 apply. In special cases, variations in these technical delivery requirements or additions to them may be agreed at the time of enquiry and order (see Annex A).
Yield stress, Steels, Heat-treatable steels, Sample location, Bars (materials), Unalloyed steels, Tensile strength, Chemical composition, Testing conditions, Forgings, Elongation at fracture, Yield strength, Designations, Marking, Hardness, Strips, Sheet materials, Heat treatment, Semi-finished products
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta