Saltar navegación principal
Normas BSI – AENOR
BS EN 60068-2-18:2001, IEC 60068-2-18:2000

BS EN 60068-2-18:2001, IEC 60068-2-18:2000

Environmental testing. Test methods. Tests R and guidance. Water

Fecha Anulación:
2017-07-06 /Withdrawn
Equivalencias internacionales:

EN 60068-2-18:2001

IEC 60068-2-18:2000

Relación con otras normas BSI:

Reemplazada por: BS EN 60068-2-18:2017

Reemplaza a: BS 2011-2.1R:1990

IEC 60068-2-18:2000 Provides methods of test applicable to products which, during transportation, storage or in service, may be subjected to falling drops, impacting water or immersion. The primary purpose of water tests is to verify the ability of enclosures, covers and seals to maintain components and equipment in good working order after and, when necessary, under a standardized dropfield or immersion in water. These tests are not corrosion tests and should not be considered and used as such. The effects of a large temperature difference between the water and the specimen, such as increased water ingress resulting from pressure changes, as well as thermal shock, are not simulated. Established water tests in other standards are not intended to simulate natural rainfall and their quoted intensities are too high to be adopted for that purpose. Therefore, in addition to the high-intensity severities, Test R includes an artificial rain test based upon natural conditions but not taking into account high wind speeds generally associated with natural rain. Guidance is given on the applicability of the tests and the severities to be selected. It has the status of a horizontal standard in accordance with IEC Guide 104.
Watertightness tests, Seals, Water, Leak tests, Covers, Electronic equipment and components, Environmental testing, Electrical components, Electrical equipment, Enclosures
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta