Saltar navegación principal
Normas BSI – AENOR
BS EN 15657-1:2009

BS EN 15657-1:2009

Acoustic properties of building elements and of buildings. Laboratory measurement of airborne and structure borne sound from building equipment. Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example

Fecha Anulación:
2017-09-18 /Withdrawn
Comité:
EH/1/6
Equivalencias internacionales:

EN 15657-1:2009

Relación con otras normas BSI:

Reemplazada por: BS EN 15657:2017

Resumen:
Part 1 of the standard shall apply to any source -receiver configuration where the receiver mobility is 10 dB below the source mobility (see definition of mobility in Clause 3 below). However, part 1 is restricted for the moment to whirlpool baths since only this type of building equipment has been experimentally studied so far; for other types of building equipment, the principle of the method is still valid, but some details in the standard might not be relevant. Therefore, this first part: - specifies methods for the measurement under laboratory conditions of airborne and structure borne sound produced by whirlpool baths connected to low mobility structures; for the case of whirlpool baths, building structures of mass per unit area equal or greater than 220 kg/m2, hollow elements excluded, are considered as low mobility elements; - defines the expression of the results, including data for comparison between products (single value descriptors) and input data for the prediction method (link to standard prEN 12354-5 explained in Annex B).
Keywords:
Construction systems parts, Sound intensity, Building services, Reverberation time, Baths, Spa baths, Mathematical calculations, Airborne noise, Acoustics, Vibration, Acoustic testing, Acoustic measurement, Laboratory testing, Buildings
204,2
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta