Saltar navegación principal
Normas ASTM – AENOR
ASTM A269/A269M-15a(2019)

ASTM A269/A269M-15a(2019)

Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

Fecha:
2019-09-19 /Active
Abstract:

This specification covers nominal-wall-thickness, seamless and welded austenitic steel tubing for general corrosion-resisting and low- or high-temperature service. All material shall be furnished in the heat-treated condition. The steel shall conform to the chemical composition requirements. Different mechanical test requirements that includes, flaring test, flange test, hardness test, and reverse flattening test are presented. Also, each tube shall be subjected to the non-destructive electric test or the hydrostatic test. Finally the hardness requirements for different grades of tubes are highlighted.

Scope:

1.1 This specification covers grades of nominal-wall-thickness, stainless steel tubing for general corrosion-resisting and low- or high-temperature service, as designated in Table 1.

Grade

Composition, %

TP
XM-29

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

UNS DesignationA

S24000

S31254

S31266

S31725

S31726

S31727

S32053

S30600A

S32654

S34565

S35045

N08367

N08925

N08926

N08904

Carbon

0.08

0.020

0.030
max

0.035

0.035

0.030

0.030

0.018

0.020

0.030

0.06–
0.10

0.030

0.020

0.020

0.020

Manganese

11.5–
14.5

1.00

2.00–4.00

2.00

2.00

1.00

1.00

2.0

2.0–
4.0

5.0–
7.0

1.50

2.00

1.00

2.00

2.00

Phosphorus

0.060

0.030

0.035

0.045

0.045

0.030

0.030

0.020

0.030

0.030

0.045

0.040

0.045

0.030

0.040

Sulfur.

0.030

0.015

0.020

0.030

0.030

0.030

0.010

0.020

0.005

0.010

0.015

0.030

0.030

0.010

0.030

Silicon

1.00

0.80

1.00

1.00

1.00

1.00

1.00

3.7–4.3

0.50

1.00

1.00

1.00

0.50

0.50

1.00

Nickel

2.3–
3.7

17.5–
18.5

21.0–24.0

13.5–
17.5

14.5–
17.5

14.5–
16.5

24.0–
26.0

14.0–
15.5

21.0–
23.0

16.0–
18.0

32.0–
37.0

23.5–
25.5

24.0–26.0

24.0–
26.0

23.0–
28.0

Chromium

17.0–
19.0

19.5–
20.5

23.0–25.0

18.0–
20.0

17.0–
20.0

17.5–
19.0

22.0–
24.0

17.0–
18.5

24.0–
25.0

23.0–
25.0

25.0–
29.0

20.0–
22.0

19.0–21.0

19.0–
21.0

19.0–
23.0

Molybdenum

...

6.0–
6.5

5.2–6.2

4.0–
5.0

4.0–
5.0

3.8–
4.5

5.0–
6.0

0.20
max

7.0–
8.0

4.0–
5.0

 

6.0–
7.0

6.0–7.0

6.0–
7.0

4.0–
5.0

Titanium

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

0.15–
0.60

. . .

. . .

. . .

. . .

Columbium

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

0.10
max

. . .

. . .

. . .

. . .

. . .

Tantalum

. . .

. . .

. . .

. . .

. . .

 

. . .

 

. . .

. . .

. . .

. . .

. . .

. . .

. . .

NitrogenF

0.20–
0.40

0.18–
0.25

0.35–0.60

0.20
max

0.10–
0.20

0.15–
0.21

0.17–
0.22

 

0.45–
0.55

0.40–
0.60

. . .

0.18–
0.25

0.10–0.20

0.15–
0.25

0.10
max

Vanadium

. . .

 

 

. . .

. . .

 

. . .

 

. . .

 

. . .

. . .

. . .

. . .

. . .

 Copper

. . .

0.50–
1.00

1.00–2.50

. . .

. . .

2.8–
4.0

. . .

0.50
max

0.30–
0.60

. . .

0.75

0.75
max

0.80–1.50

0.50–
1.50

1.00–
2.00

 Others

. . .

. . .

W 1.50–2.50

. . .

. . .

. . .

. . .

. . .

. . .

. . .

Al
0.15–
0.60

. . .

. . .

. . .

. . .

1.2 The tubing sizes and thicknesses usually furnished to this specification are 1/4 in. [6.4 mm] in inside diameter and larger and 0.020 in. [0.51 mm] in nominal wall-thickness and heavier.

1.3 Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] in inside diameter or 0.015 in. [0.38 mm] in thickness.

Note 1: Additional testing requirements may apply for use in ASME B31.3 applications.

1.4 Optional supplementary requirements are provided and, when one or more of these are desired, each shall be so stated in the order.

1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order.

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Keywords:
austenitic stainless steel; seamless steel tube; stainless steel tube; steel tube; welded steel tube ;
43,68
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta