Saltar navegación principal
Normas ASTM – AENOR
ASTM F1173-01(2018)

ASTM F1173-01(2018)

Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications

Fecha:
2018-04-04 /Active
Abstract:

This specification covers the classifications of and basic requirements for thermosetting fiberglass reinforced resin pipe systems with nominal pipe sizes (NPS) 1 through 48 in. (25 through 1200 mm) which are to be used for all fluids approved by the authority having jurisdiction in marine piping systems. The piping system shall adhere to specified requirements such as internal and external pressure, fire endurance, flame spread, smoke and other toxic products of combustion, temperature, material compatibility, electrical resistance, static charge shielding, potable water usage, glass content, and wall thickness.

Scope:

1.1 This specification covers reinforced thermosetting resin pipe systems with nominal pipe sizes (NPS) 1 through 48 in. (25 through 1200 mm) which are to be used for all fluids approved by the authority having jurisdiction in marine piping systems.

1.2 The dimensionless designator NPS has been substituted for traditional terms as “nominal diameter,” “size,” and “nominal size.”

1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4 The following safety hazards caveat pertains to the test methods which are included in this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Keywords:
epoxy resin fittings; epoxy resin pipe; marine piping; nominal pipe size; thermoset epoxy resin pipe;
48,45
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta