Saltar navegación principal
Normas ASTM – AENOR
ASTM B441-16

ASTM B441-16

Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)

Fecha:
2016-12-27 /Active
Abstract:

This specification establishes the requirements for copper-cobalt-beryllium alloy (UNS No. C17500), copper-nickel-beryllium alloy (UNS No. C17510), and copper-nickel-lead-beryllium alloy (UNS No. C17465) rods and bars in straight lengths. Tempers available under this specification are: TB00 (solution heat treated (A)), TF00 (precipitation hardened (AT)), TD04 (solution heat treated and cold worked: hard (H)), and TH04 (hard and precipitation heat treated (HT)). Materials shall be tested and adhere to mechanical (tensile strength and Rockwell hardness), electrical conductivity, and chemical composition requirements.

Scope:

1.1 This specification establishes the requirements for copper-cobalt-beryllium alloy (UNS No. C17500), copper-nickel-beryllium alloy (UNS No. C17510), and copper-nickel-lead-beryllium alloy (UNS No. C17465) rod and bar in straight lengths.

1.2 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units, which are provided for information only and are not considered standard.

1.3 The following hazard caveat pertains only to the test method(s) described in this specification.

1.3.1 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Keywords:
beryllium copper bar; beryllium copper rod; UNS C17500 bar; UNS C17500 rod; UNS C17510 bar; UNS C17510 rod; UNS C17465 bar; UNS C17465 rod;
37,63
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta