Saltar navegación principal
ASTM D5998-16

ASTM D5998-16

Standard Specification for Molded Polyethylene Shipping and Storage Drums

2016-12-27 /Active

This specification covers self-supporting, molded polyethylene, tight head drums for use in surface and air shipments. Drums shall be manufactured from virgin or recycled polyethylene plastics, and with handles and openings the number of which depends on the capacity of the drum. Safety seals and torque wrenches may also be provided as necessary. The drum shall be uniform in color and free of lumps, blisters, or flash, with the drum interior clean and free of foreign matter. Drop, leak proofness, hydrostatic pressure, stacking, handling, and capacity tests shall be performed and shall conform to the requirements specified. The drum shall also be examined to assess its conformance with the specified dimensions and capacity.


1.1 This specification covers self supporting, molded polyethylene, tight head drums designed for surface and air shipment, ranging in size from 5 gal (19 L) to and including 55 gal (208 L).

1.2 Virgin or recycled polyethylene plastics2 or combinations thereof can be used provided the finished product meets the requirements of this specification.

Note 1: There is no known ISO equivalent to this standard.

Note 2: This standard is intended to replace MIL-D-43703C.

1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units that provided for information only and are not considered standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

barrel; container; plastic container; polyethylene drum; recycled plastic;
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta