Saltar navegación principal
ASTM C1542/C1542M-16a

ASTM C1542/C1542M-16a

Standard Test Method for Measuring Length of Concrete Cores

2020-01-27 /Historical
Superseeded by:
Significance and Use:

4.1 This test method provides two procedures for determining the length of a core obtained in accordance with either Test Method C42/C42M or Test Method C1604/C1604M. This length is used in conjunction with condition surveys, density and voids analysis, and other applications.

4.2 This procedure does not intend to include in the length measurement adhered particles not part of the concrete mixture.

4.3 Test Method C174/C174M also determines the length of concrete cores using a different measuring apparatus and procedure.

Note 1: Test Method C174/C174M uses an apparatus that establishes two parallel planes a known distance apart. The length of the core is determined by calculation using the known distance between the two parallel planes and the measured distance from the upper plane to the top of the core.


1.1 This test method is used to determine the length of a core drilled from concrete.

1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the inch-pound units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

concrete; core; jaw caliper; ruler; length measurement;
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta