Saltar navegación principal
ASTM E768-99(2010)e1

ASTM E768-99(2010)e1

Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel

2018-06-25 /Historical
Superseeded by:
Significance and Use:

4.1 Inclusion ratings done either manually using Test Methods E45 or automatically using Practice E1122 or E1245 are influenced by the quality of specimen preparation. This guide provides examples of proven specimen preparation methods that retain inclusions in polished steel specimens.

4.2 This guide provides a procedure to determine if the prepared specimens are of suitable quality for subsequent rating of inclusions. None of these methods should be construed as defining or establishing specific procedures or limits of acceptability for any steel grade.


1.1 This guide2 covers two preparation methods for steel metallographic specimens that will be analyzed for nonmetallic inclusions with automatic image analysis (AIA) equipment. The two methods of preparation are offered as accepted methods used to retain nonmetallic inclusions in steel. This guide does not limit the user to these methods.

1.2 A procedure to test the suitability of the prepared specimen for AIA inclusion work, using differential interference contrast (DIC), is presented.

1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

automatic image analysis; differential interference contrast; inclusions; specimen preparation; steel;
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta