Saltar navegación principal
Normas ASTM – AENOR
ASTM C520-15

ASTM C520-15

Standard Test Methods for Density of Granular Loose Fill Insulations

Fecha:
2020-03-20 /Historical
Superseeded by:
Significance and Use:

4.1 Method A will be used primarily as a manufacturing quality control and field test method without the need for conditioning. For more accurate research purposes, conditioning shall be specified.

4.2 Method B will be used, when specified, to determine the density at which insulation properties such as thermal resistance and placement coverage are to be determined.

Scope:

1.1 These test methods are applicable to granular loose fill insulation materials such as vermiculite and perlite. They are used for other insulation materials with similar flow and settling properties.

1.2 Method A shall be used to determine bulk density.

1.3 Method B shall be used to determine design density and, with Method A, is used to calculate percent loss of volume due to settling.

1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Keywords:
bulk density; density; design density; granular loose fill; insulation; perlite; thermal insulation; vermiculite; volume loss ;
44,87
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta