Saltar navegación principal
Normas ASTM – AENOR
ASTM D1330-04(2015)e1

ASTM D1330-04(2015)e1

Standard Specification for Rubber Sheet Gaskets

Fecha:
2016-12-27 /Active
Abstract:

This specification covers gaskets cut from sheet rubber that are intended for general gasket applications on water, air, and low-pressure steam. The rubber sheet gasket covered by this specification are not intended for use with oils and strong acids. Compounds furnished under this specification shall be manufactured from natural rubber, reclaimed rubber, synthetic rubber, or mixtures thereof, together with added compounding materials, and shall be suitably vulcanized. The material shall be red or black in color as specified and shall conform to the prescribed physical property requirements including hardness, tensile strength, elongation, change in tensile strength and elongation after air aging, and compression set. Hardness, tensile strength, compression set, and air-aging tests shall be performed.

Scope:

1.1 This specification covers gaskets cut from sheet rubber that are intended for general gasket applications on water, air, and low-pressure steam. They are not intended for use with oils and strong acids.

1.2 The values stated in SI units are to be regarded as the standard.

Keywords:
air; low-pressure steam; rubber; sheet gaskets; water;
36,97
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta