Saltar navegación principal
Normas ASTM – AENOR
ASTM D2609-15

ASTM D2609-15

Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe

Fecha:
2017-01-23 /Active
Abstract:

This specification covers plastic insert fittings for polyethylene (PE) plastic pipe. The fittings shall be made from one of the following plastics: nylon plastics, propylene plastics, and poly(vinyl chloride) plastics. Dimensions and burst pressure for the fittings should meet the requirements specified. The fittings shall be homogeneous throughout and free of cracks, holes, foreign inclusions, or other defects. The fittings shall be as uniform as commercially practicable in color, opacity, density, and other physical properties.

Scope:

1.1 This specification covers plastic insert fittings for polyethylene (PE) plastic pipe, and also PVC insert fittings for PE to PVC pipe transitions. Included are requirements for materials, workmanship, dimensions, and burst pressure.

1.2 The text of this specification references notes, footnotes, and appendixes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification.

1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4  The following safety hazards caveat pertains only to the test methods portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Keywords:
barb; fittings; insert; plastic; polyethylene;
37,95
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta