Saltar navegación principal
Normas ASTM – AENOR
ASTM D7682-12

ASTM D7682-12

Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty

Fecha:
2017-03-21 /Historical
Superseeded by:
Significance and Use:

5.1  For proper bonding of overlays and coatings, it is important that a concrete surface have the correct surface profile. This test method allows one to obtain a permanent replica of the concrete surface, which can then be compared to visual profile standards, or evaluated quantitatively for profile depth. The permanent replica may also prove useful in resolving future disputes.

Plastic Profiler with Replica Putty on Concrete
FIG. 1 Plastic Profiler with Replica Putty on Concrete
Scope:

1.1 This test method is suitable for both field and laboratory use to obtain a permanent record of concrete surface profile using replica putty and to determine the depth of that surface profile.

Note 1The procedure in this standard was developed for concrete substrates but may be appropriate for other rigid substrates.

1.2 A profile can be imparted to concrete by various methods such as blast cleaning and acid etching. The depth of the surface profile has been shown to be a factor in coating adhesion and performance.

1.3 The International Concrete Repair Institute (ICRI) provides a means of visually judging a concrete surface by use of nine different visual comparators called Concrete Surface Profiles (CSP). This standard compliments the use of these visual comparators.

1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Keywords:
comparator; concrete; concrete profiler; micrometer; replica coupon; replica putty; surface profiler; surface roughness
44,87
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta