Saltar navegación principal
Normas ASTM – AENOR
ASTM B167-11

ASTM B167-11

Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube

Fecha:
2016-06-09 /Historical
Superseeded by:
Abstract:

This specification covers nickel-chromium-iron alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696) and nickel-chromium-cobalt molybdenum alloy (UNS N06617) in cold-worked annealed, hot-worked annealed, and hot-finished seamless pipe and tube intended for general corrosion resistant and heat resistant applications. The material shall conform to the required chemical composition for nickel, chromium, iron, manganese, molybdenum, cobalt, aluminum, carbon, copper, boron, silicon, sulfur, titanium, niobium, phosphorous, zirconium, yttrium, and cerium. The following test methods shall be performed on the alloys, namely: chemical analysis, tension test, and hydrostatic or nondestructive electric test. The material shall conform to the required mechanical properties such as tensile strength, yield strength, elongation, nondestructive electric test, and rounding method.

Scope:

1.1 This specification covers nickel-chromium-iron alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* nickel-chromium-cobalt-molybdenum alloy (UNS N06617), and nickel-iron-chromium-tungsten alloy UNS N06674), in cold-worked annealed, hot-worked annealed, and hot-finished seamless pipe and tube intended for general corrosion resistant and heat resistant applications.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 The following safety hazards caveat pertains only to the test methods portion, Section 13, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Keywords:
seamless pipe; seamless tube; UNS N06025; UNS N06045; UNS N06600; UNS N06601; UNS N06603; UNS N06617; UNS N06674; UNS N06690; UNS N06693; UNS N06696: Corrosive service applications--pipe (Ni/Ni alloy); Corrosive service applications--tube (Ni/Ni alloys); Nickel alloy pipe--specifications; Nickel alloy tube--specifications; Nickel-chromium alloys--specifications; Nickel-chromium-cobalt-molybdenum alloy--specifications; Nickel-chromium-iron alloys--specifications; UNS N06025 (Ni-Cr-Fe-Al alloy, Nicofer 6025 HT); UNS N06045 (Ni-Cr-Fe-Si alloy, Nicrofer 45); UNS N06600 (Ni-Cr alloy, Inconel 600); UNS N06601 (Ni-Cr alloy, Inconel 601); UNS N06603 (Ni-Cr-Fe-Al-C alloy, 603GT); UNS N06617 (Ni-Cr alloy, Inconel 617); UNS N06690 (Ni-Cr alloy, Inconel 690); UNS N06693 (Ni-Cr-Fe-Al-CB alloy, Inconel 693)
49,73
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta