Saltar navegación principal
Normas ASTM – AENOR
ASTM D3241-11

ASTM D3241-11

Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels

Fecha:
2011-10-12 /Historical
Superseeded by:
Significance and Use:

The test results are indicative of fuel performance during gas turbine operation and can be used to assess the level of deposits that form when liquid fuel contacts a heated surface that is at a specified temperature.

Scope:

1.1 This test method covers the procedure for rating the tendencies of gas turbine fuels to deposit decomposition products within the fuel system.

1.2 The differential pressure values in mm Hg are defined only in terms of this test method.

1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 6.1.1, 7.2, 7.2.1, 7.3, 11.1.1, and Annex A3.

A1.1.1 This method covers a procedure for visually rating the heater tube produced by Test Method D3241.

A1.1.2 The final result from this test method is a tube color rating based on an arbitrary scale established for this test method plus two additional yes/no criteria that indicate the presence of an apparent large excess of deposit or an unusual deposit, or both.

Keywords:
differential pressure; fuel decomposition; oxidative deposits; test filter deposits; thermal stability; turbine fuel; Aviation turbine fuels; Fuel degradation; Oxidation testing--petroleum products; Thermal oxidation stability; Thermal stability--petroleum products
56,44
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta