Saltar navegación principal
Normas ASTM – AENOR
ASTM A333/A333M-10

ASTM A333/A333M-10

Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service

Fecha:
2010-12-31 /Historical
Superseeded by:
Abstract:

This specification covers wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. The pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation. All seamless and welded pipes shall be treated to control their microstructure. Tensile tests, impact tests, hydrostatic tests, and nondestructive electric tests shall be made in accordance to specified requirements.

Scope:

1.1 This specification covers nominal (average) wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. Several grades of ferritic steel are included as listed in Table 1. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties.

1.2 Supplementary Requirement S1 of an optional nature is provided. This shall apply only when specified by the purchaser.

1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the M designation of this specification is specified in the order.

Note 1—The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as nominal diameter, size, and nominal size.

Keywords:
low; low temperature service; seamless steel pipe; stainless steel pipe; steel pipe; temperature service applications; Alloy steel pipe--specifications; Carbon steel pipe--specifications; Low-temperature service applications--steel; Seamless steel pipe--specifications; Stainless steel pipe--specifications; Welded steel pipe--specifications
51,15
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta